Follow us on Facebook Follow us on Twitter Linked In Flickr Watch us on YouTube My Space Blogger
التسجيل
النتائج 1 إلى 6 من 6

Quad bike

هذا الموضوع : Quad bike داخل Making oFالتابع الي قسم ابداعات طريق الجرافيك : Introduction This will be a brief explanation about making of the quad bike, I like quads but you won’t exactly ...

  1. #1

    الصورة الرمزية طريق الجرافيك
    إدارة طريق الجرافيك

    الحالة
    غير متصل
    تاريخ التسجيل
    Jun 2006
    الدولة
    طريق الجرافيك
    المشاركات
    172
    Thanks
    0
    Thanked 1 Time in 1 Post
    معدل تقييم المستوى
    50

    Quad bike

    Introduction
    This will be a brief explanation about making of the quad bike, I like quads but you won’t exactly see me riding one (too scary for me ) anyway it was needed for a small project for a presentation of a quad and motorcycles racing track, it needed to be animated as well.
    Reference
    As usually if you needed any decent realistic existing model you need reference, unfortunately I couldn’t find blueprints for the quad but I did manage to find a decent front side pictures, a tip is to not only look in the official sites and try google image search or anything similar, amateur images is sometimes more clear than good ones because they don’t do any effort to make it perfect they show it for how its really is

    As you see its far from perfect reference, so when modeling you always have to be careful and look at reference images taken from a normal viewing angle and checking to see if it’s the same or not (simply use your eye), you can pretty much say that modeling without decent blueprints isn’t certainly your first choice, I can hear some one out there saying duh anyway.
    A little trick also is to put the reference image as a background then use a camera to try to replicate the original one, and see if there are major proportional differences (camera match)
    Modeling
    I’ve had no problems with modeling, the only hard thing was the lack of good reference which makes modeling more time consuming, I made the all the basic objects using editable poly as following:




    then I started adding details also using primitives, splines etc.. and adding simple modifiers to primitives taper, FFD etc
    I did also make 4 or 5 types of screws and small objects so I can quickly start copying them and instancing them, that added good amount of details very quickly


    for the more fine details, I collapsed the poly objects and used Boolean to cut them quickly and then edited the mesh to fix the Boolean distortion, that way I made front light holes and practically all holes in the body (its basically polygon way of NURBS trimming but always remember that Boolean is problematic and should be avoided if possible)

    it might cross your mind that adding too many details will take a lot time, but when you are copying basic objects and making details out of primitives it really doesn’t take that effort I did model the wheel details, because a quad wheel cannot certainly be represented by a bump map




    Texturing
    For the texturing I didn’t spend quite a lot of time on it I am afraid as I had to finish quickly
    I’ve unwrapped the model quickly and concentrated on the parts that will have details on them mainly then went to Photoshop and drew the stickers and all details, if I had time to do it again I will unwrap it probably and add proper dirt or make a blend material and add dirt to give dirt a different material. I did give some parts blend materials with masks to give for example the Polaris logo a different material than the body
    Rigging
    For the rigging and controllers I used simple techniques to do it but it worked I used 3dsmax5 which still didn’t have a reaction manger and I did have to use wire parameters. I will try to explain some of the tricks I have done just to let you know in general how its fully rigged. For the front axe for example as following:


    and here how I done it. I just placed a bone for the horizontal axe and a bone for the vertical one gave both of them an IK chain. I connected the horizontal IK controller with a circle I have done but for the vertical IK controller I connected it to a dummy object connected with the horizontal bone.
    So when I move the circle it will act as a real axe
    This image makes it more clear.
    for the spring it self as you notice from the previous images it does work as a spring. I just used wire parameters and made the position of the circle control the height of the spring




    for the back spring same as front but instead I made a metal chain which actually loops correctly when the back wheel rotates
    I made the chain using path deformation then controlled the percentage of path by the rotation of the wheel, simple but it works
    Steering also is rigged
    To control the rotation of the wheels according to the steering I did use strange method to quickly make it without using wire parameters and figuring out the right axes and parameters
    I placed 2 dummy object in front of each wheel as in the image and constrained each wheel to look at target to the dummy then linked the dummy to the steering, that way when the steering rotates the dummy will move with it causing the front wheels to rotate accordingly
    I hope this image makes it clearer
    The right way to do it would be to use wire parameters or max reaction manager (set driven keys in maya) or and orientation constraint if possible

    I made dummy objects on top of the geometry so I can see them instead of the high poly object when animating
    Rendering
    It was rendered using brazil, nothing special in the rendering scene though
    Simple brazil scene with Indirect illumination and an HDRI skylight and couple of fill light and some objects with brazil utility material
    Materials are standard materials with falloff reflections for some parts, Brazil accepts standard max materials also.
    I used the boxes you see in the picture and used this brazil utility material with them in order to emit light and reflect on surfaces similar to studio lightning, I use this technique a lot when rendering industrial models
    The fill lights don’t make a huge difference but they give a warm since to the scene, I choose usually colors like orange green and even purple for these lights with low multiplier
    I have tried Mental Ray, Vray and brazil to render products and brazil was the easiest to use and obtain results. But the result you get with vray and mental are outstanding as well.




    And this is the final result:
    here is the second quad I have done for the same project using same techniques:


    Copyright © Ali Ismail
    Edit by Raider
    Source: http://www.3dm3.com


  2. #2
    مصمم مشارك

    الحالة
    غير متصل
    تاريخ التسجيل
    Feb 2007
    الدولة
    qatar
    المشاركات
    82
    Thanks
    0
    Thanked 0 Times in 0 Posts
    معدل تقييم المستوى
    14
    عمل رائع بجد

  3. #3


    الصورة الرمزية abdou3d
    مشرف فن التحريك - ورش عمل ومسابقات

    الحالة
    غير متصل
    تاريخ التسجيل
    Oct 2007
    الدولة
    Egypt
    العمر
    32
    المشاركات
    4,331
    Thanks
    0
    Thanked 2 Times in 2 Posts
    الصور
    10
    معدل تقييم المستوى
    102
    بدأت اشعر ان الماكس ليس بالصعوبه التي كنت اتخيلها من قبل....... متشكر جدا

  4. #4

    الصورة الرمزية AzizX
    طالب بالمركز التعليمي

    الحالة
    غير متصل
    تاريخ التسجيل
    Aug 2010
    الدولة
    سلطنة عمان
    المشاركات
    561
    Thanks
    0
    Thanked 0 Times in 0 Posts
    معدل تقييم المستوى
    21

    رد: Quad bike

    جميل جدااا

  5. #5

    الصورة الرمزية speed_3d
    طالب بالمركز التعليمي

    الحالة
    غير متصل
    تاريخ التسجيل
    Dec 2007
    الدولة
    iraq
    العمر
    30
    المشاركات
    1,717
    Thanks
    0
    Thanked 0 Times in 0 Posts
    الصور
    11
    معدل تقييم المستوى
    46

    Thumbs up رد: Quad bike

    جميل جداً عاشت الايادي

  6. #6

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    رد: Quad bike

    بارك الـله فــيك عمل ممتاز


 

 

المواضيع المتشابهه

  1. درس تصميم دراجة نارية Bike Tutorial
    بواسطة fass في المنتدى مايا | Autodesk Maya
    مشاركات: 9
    آخر مشاركة: 07 / 03 / 2013, 52 : 02 PM
  2. Making of Quad bike by Ali Ismail
    بواسطة waleed_ali في المنتدى الدورات والدروس التعليمية | 3dsMax Tutorials & Tips
    مشاركات: 12
    آخر مشاركة: 29 / 12 / 2012, 53 : 07 AM
  3. Modeling Sports Bike
    بواسطة 4MAX في المنتدى اعمال طلاب المركز
    مشاركات: 5
    آخر مشاركة: 23 / 08 / 2010, 53 : 12 AM
  4. Free Quad Head Modeling & Texturing
    بواسطة 3DTaha في المنتدى Downloads and Torrent
    مشاركات: 0
    آخر مشاركة: 21 / 07 / 2008, 18 : 12 AM
  5. الى كل عشاق Bike race
    بواسطة testout في المنتدى الأرشيف و المواضيع القديمة
    مشاركات: 1
    آخر مشاركة: 24 / 02 / 2007, 00 : 12 PM

الكلمات الدلالية لهذا الموضوع

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
الساعة الآن 33 : 04 AM
Powered by vBulletin® Version 4.2.3
Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.
Search Engine Optimization by vBSEO