Follow us on Facebook Follow us on Twitter Linked In Flickr Watch us on YouTube My Space Blogger
التسجيل
النتائج 1 إلى 12 من 12

درس اجنبي لنمذجة واكساء رجل

هذا الموضوع : درس اجنبي لنمذجة واكساء رجل داخل الدورات والدروس التعليمية | 3dsMax Tutorials & Tipsالتابع الي قسم Autodesk 3D Studio Max : السلام عليكم ورحمة الله وبركاته وجدت هذا الدرس الاكثر من رائع والمتميز بحق اثناء تصفحي الانتر نت اتمنى الدرس يعجبكم ...

  1. #1


    الصورة الرمزية ام اياد
    الإشراف العام

    الحالة
    غير متصل
    تاريخ التسجيل
    Jul 2007
    الدولة
    مصرية في الامارات
    المشاركات
    7,307
    Thanks
    0
    Thanked 3 Times in 3 Posts
    معدل تقييم المستوى
    179

    درس اجنبي لنمذجة واكساء رجل

    السلام عليكم ورحمة الله وبركاته
    وجدت هذا الدرس الاكثر من رائع والمتميز بحق اثناء تصفحي الانتر نت اتمنى الدرس يعجبكم ويكون مفيد لكم اخواني


    Welcome to the first section of this 3 part tutorial on the creation of this low poly character. We contiune this tutorial next Monday.

    This tutorial is for the creation of Low-Poly "Portable Game Resolution" real-time characters. This tutorial is being made with 3D Studio Max and Photoshop and all program-specific instructions are for those programs. The basic techniques can be transferred to other applications if you are already very familiar with those programs.

    The first thing you should ever do before even opening your 3D app is to get your ref ready. I wasn't aiming for anything fancy or elaborate. Nothing fantasy or sci-fi. Just a guy. So I'm using photo ref. A well-drawn and proportionally accurate drawing is also a good option. If you are not confident in your drawing ability, either get someone else to draw your ref, download a drawing, or just use photographs.

    This is the guy I'm using. It's actually a compilation of two different guys, in order to get the clothing I liked.






    (Right-click and save link as for higher-res versions of these)

    These images came from 3d.sk. It is probably the best source I've ever encountered of human reference. It's great for anatomy, for clothing, for textures, etc. etc. etc.... It is however a PAY SITE and it is sort of expensive... Team up with some friends and pay for one month and each of you can power-download and try to grab everything you can from the site before your subscription runs out.

    A Couple Tips for your Reference Images: - Make sure your reference images are the exact same size and that the images line up with each other.
    - I've found its best if your reference images are squares, so even if you don't need all that extra space, still include it.
    - Make sure that everything is in the exact center of the image file. Especially the front or back images.
    - Mirror your image to make sure it'll look right when modeled with symmetry.
    - Make sure that the background color of your reference image is not white or very light gray. As you can see in 3dsmax, the wire frame usually shows up as white, and if your background is white too, it makes it very difficult to work!

    Setting up the Viewports:
    1. Open 3dsmax
    2. Your screen should have a 4-viewport split (top, front, left, and perspective). Click in Front.
    3. Go to Views > Viewport Background (or press Alt+B)
    4. Click the "Files..." button and find your front reference image.
    5. In the Aspect Ration area (bottom left) choose Match Bitmap.
    6. To the right, Check "Lock Zoom/Pan
    7. Click OK and Repeat for the Left Viewport.

    The Window Should Look like this -




    Before we really get started, I want to explain a few things in hopes that you won't get lost later. To the left of the screen is a set of tabs. Each of these lets you access a different set of important tools and features in 3d studio max.




    The First one is Create
    - In Create you can make a bunch of primitive objects. Box, Sphere, Cone, etc. There is a drop-down menu at the top (Says Standard Primitives by default). If you change this, there are other types of things that you can create. In the newer versions of max, you can even create stairs, and trees, and other automatic objects here. But all we care about right now is the Box. But we'll get to that in a minute...

    The Second Tab is Modify
    - You will spend most of your time in this tab. It is where you can actually MODEL.
    The Third Tab is Hierarchy
    - This tab will be important in our tutorial when we use the symmetry modifier to mirror the model. The location of the model's pivot is very important to making things like symmetry and mirror work. You can click the Affect Pivot Only button, and move an objects pivot to Zero and then symmetry will work.
    The Forth Tab is Motion
    - If you rig your character using Biped, all of the biped options will display here. There are a lot of things you can do in here, but only when doing specific tools or doing specific things that involve animation and controllers. Nothing too important to what we're doing in this tutorial.
    The Fifth Tab is Display
    - You can hide objects, freeze them (makes it so you can't select them, but they're still visible), and change the display properties of an object here.
    The Sixth Tab is Utilities
    - Some utilities are more useful then others. One thing of use you can find here is the poly counter. If you click on the More button a list will appear and Polygon Counter should be in the list. This will let you check what your character's poly count is.


    Lets Start:

    1. Go to the Create Tab and click on Box.
    2. In the Front viewport draw a box around the shoe. Set the Length, Width, and Height Segs to 1.
    - I always just use a straight up plain box to start. And I prefer to start with one that doesn't have any segments in it already, since I judge how many I need by the reference image.
    3. Go to the Modify Tab
    4. Right-Click on the word Box and convert to Editable Poly.


    Now you have a whole bunch of new stuff, where before you just had the parameters of the box. By default you won't see this list - you have to click on the little + sign before the words Editable Poly. Do that now.

    For the total newbs reading this, the Vertices (vertex) are the dots, Edge is pretty self-explanatory, Border will select all the edges on an external border that you click on, Polygon are the faces of the model - the squares/triangles that make up the surface (you should avoid n-gons in your geometry at all costs. An n-gon is a polygon with more then 4 sides.) And element will select the entire object.

    You can also change selection type by clicking on the icons just below the word "Selection".





    Useful Tip most people don't know!

    If you have a selection of one type, you can convert that selection to another type by holding down the Ctrl Key and clicking on one of the other type's icons under Selection. Example: You have a group of Polys selected, hold down Ctrl and click on the Vertex icon and your selection is converted to all of the verts that made up the polys you had selected.

    The options and tools available in the edit poly modifier will differ depending on what you have selected. These are the most important tools that you will use over and over and over again while modeling.




    The image on the left shows what tools are available if you are in the Edges selection, and the image on the right shows the tools for Vertices. You will find that you often use Remove, Bride, Connect, Chamfer, Target Weld, and Weld.

    Some of the tools have a box icon next to them. With these, if you click the box instead of the main button, you will get a window that opens with several options to choose from. You will click the box most often. Clicking the button will use the tool with either the default settings, or whatever settings you entered into the box last.

    Go to vertex select mode, and grab the verts of the back of the box in the left viewport and pull them back to the heel.

    Go to edge select mode and select the vertical edges (the front and back of the foot) and click the box next to the Connect tool. The window pops up - we only need one segment right now, so the defaults are fine.



    In the Top View select the edges along the heel and toe and repeat. Now you've made a division down the center of the side and top of the foot. From the top now select the sides of the foot and click the button next to connect, this time we want 2 segments.

    Go back to vertex mode now and start moving things around in the different viewports so it matches the shape of the foot. Switch between the side and top viewports to get the shape better. For the part of the foot where it starts coming up in the front, I select the edges along the top of the foot, but not the bottom and hit connect (only 1 segment) then connected the edge verts to one of the near verts to avoid n-gons.




    Go to the Perspective Viewport now and take a look at the foot. Obviously it's not going to be quite right, but it's closer. Start bringing in areas like the top of the shoe, around the heel, etc.




    The temptation will be to start adding more geometry so you can match the shape better, but TRY NOT TO. You will add detail with the texture. Think of this as a big lump of clay and you're just aiming to get the general mass and shape of the object. Try to achieve the best shape you can with as little geometry as possible. There's no point wasting a bunch of verts on the feet when you've got a tight budget.




    But Some new geometry is sometimes necessary... I decided that I wanted to define the heel of the shoe, so I selected the edges circled above and clicked connect with the box. Change segments to 2 and adjust the values of Slide and Pinch so that it's closer to the actual heel. Then select one row of verts and pull them up.
    Make sure to connect the new verts to other verts to avoid n-gons. Tris (3-sided polys) are okay, Quads (4-sided polys) are okay, but not 5 or more.





    Check all the various angles frequently to judge if you're getting the volume and shape right.

    Smoothing Groups:
    3D Studio Max uses smoothing groups to make low-poly geometry look smooth. In Real-time it's called "Normal Smoothing". Most all 3D apps have the feature, but each call it something different. (In Maya it's just Hard or Soft Edges for example)

    To control the smoothing groups you have to be in Polygon select mode. Select a group of polys (or your entire mesh if you want) and scroll down in the Polygon modifying area until you see the Polygon Properties rollout.

    The smoothing groups area looks like a grid of numbers. Each number is a group that will be smoothed together. If you select a group of polys and you see several numbers grayed out that means that these polys do not all share the same groups.

    For the foot, first select all of the polys and click the Clear All button. The model will now look completely faceted.




    Now select just the heel, and the ball of the shoe (but not the indent) and click the 1 button.

    Now select just the indent and click the 2 button.

    Now select the rest of the shoe and click the 3 button.




    You've now assigned smoothing groups.The shoes are one of the few areas will I will separate out areas for groups. For most of the model, I will have the entire mesh all be assigned to a single smoothing group.

    Once you're satisfied with the shape of the shoe, select the polys that make up the top border and delete them. Then go to Border select mode and click on the open edge.


    Now go to the Left viewport, HOLD DOWN SHIFT and MOVE the edges up. Instead of moving them, it has created new polys!




    Do this a few more times, going up the lege to around the knee. Remember, the fewer edges you need to get the correct shape, the better. We're just working the left viewport right now, we will move to the front viewport in a moment but first, lets add in a few small details.





    A lot of people feel like they need to add in an entire row of edges for every little detail, but that's a waste. We want a little bit of geometry for the major wrinkles near the bottom of the pant leg, but don't need an entire row of edges for it. Select the front edges and click connect and adjust the slide so that the new edges are lower. Connect the edge verts to an existing vert to avoid n-gons. Move the new verts outward to closer fit the contour of the leg.

    Go ahead and do this around the knee area as well. Once you've got the side going up just past the knee and are happy with the basic shape, switch to the front view.




    Yikes! Okay... so it looks funky, That's okay! Just start moving things around so they line up a little better from the front viewport. Remember things won't be perfect, but get it close.


    Another useful and essential tool for poly modeling is the Cut Tool. To get to it, you need to scroll further down in the editable poly modifier tools then the standard edit vert / edit edge area. It's under the Edit
    Geometry Rollout.

    Cut will let you cut new edges directly on the surface of your model. It's usually most useful in the perspective viewport.



    Something to watch for though! It's common to think you've clicked on an already existing vert and cut a new edge, but max thinks that you clicked just off the vert and has created a new vert. So even though you can't really see it, you now have two verts sitting right next to each other. When this happens just select the verts and Weld with a high threshold so that the two verts are welded together.



    I cut this edge along the bottom of the pants cuff and then pulled the edges out to give the bottom of the pants more volume. You should also use cut in other areas around the pants to define other wrinkles and deformations in the shape of the cloth. Remember though! Don't go overboard. Just very basic volume defining changes.


    Once you're satisfied with the shape of the legs so far, return to Border selection mode and select the top of the legs. Once again, Hold Down Shift and move upwards a few times for the upper legs.

    My plan is for the shirt and pants to be separate meshes. The jacket is very baggy and extends over the pants a lot, so the two objects will not connect directly. Because of this, I need some of the pant geometry to continue up under the jacket. This is especially important for when the character is rigged and animated. It's important that a big empty gap shouldn't appear under the jacket.



    Shape the edges in the front viewport to match the legs better. It is ideal to have a V-shape coming from the groin area. It will deform a lot better if you do this.



    For the Groin area, I selected the inner edges, held down Shift and moved them to the side to extrude new faces. Then I selected the bottom verts (circled in image) and clicked the REMOVE button. The remaining verts need to be moved to the exact center. Select a single vert and at the bottom of the max window under the animation timeline are three areas where you can enter numbers. Change the X axis location of the vert to 0. This will move the vert to the center. Do this for all of the verts you have here in the center of the groin.



    Switch to the Perspective viewport and start tweaking and fixing all of the shape problems that are bound to be there. If any side looks really flat, just bring in the edges more to round it out some. You also need to attend to the butt. This area will require some cutting and a lot of small adjustments to get it to look okay. In this model isn't not a huge deal if it looks perfect since it will be mostly covered by the jacket, but it's still a good idea to get the geometry fairly clean on it .



    Chances are that the leg is very faceted at this point, so lets do the smoothing groups thing again to smooth out our leg. Go to Polygon select mode and select the whole pant leg and set it to smoothing group 4. Rotate around the leg and clean up any problems you can see with the mesh.


    Now it's time for Symmetry.


    Go to the Hierarchy tab. Closer to the bottom are these two buttons. Click them both.



    Now at the top there is a button that says Affect Pivot Only. Click that button. The move cursor will change a little to show that now you are controlling the pivot. In the X Axis entry at the bottom of the screen, set it to 0. Now the model's Pivot is in the exact center.




    Return to the Modify tab and click on the drop-down menu that says "Modifier List".

    Scroll way down towards the bottom and find the modifier called Symmetry. If you're model suddenly disappears check "Flip". If it's doing symmetry from the wrong directly, toggle through the Mirror Axis until you get the right one.




    Now is a good time to go and fix any screaming errors that only now make themselves apparent. You can go back to the Editable Poly and continue working on the model with the symmetry modifier on the top of the stack. But when you go back to editable poly, suddenly you won't have the symmetry anymore! But we can fix that! There is a set of icons directly under Editable Poly, but above the parameters. The 2nd button is "show end result". If you click this button, it will show the symmetry, even when working in the Editable Poly area.



    Starting the
    Jacket:

    Since the Jacket is going to be a separate object, I'm not just going to extrude it from the pants like I did the pants from the shoes. But I don't want to start from a box either. So I selected the edges along the top of the pants and held down SHIFT and pulled up to create a new row of polys. I went into Polygon edit mode, selected the new row and clicked the DETACH button.



    At this point you will still have the legs selected. Deselect the legs and select the new detached object you just created. Go into vertex mode and start moving the vets so that it matches the reference. Also check the side view to adjust for that as well.




    التعديل الأخير تم بواسطة ام اياد ; 09 / 05 / 2011 الساعة 02 : 06 AM

  2. #2


    الصورة الرمزية ام اياد
    الإشراف العام

    الحالة
    غير متصل
    تاريخ التسجيل
    Jul 2007
    الدولة
    مصرية في الامارات
    المشاركات
    7,307
    Thanks
    0
    Thanked 3 Times in 3 Posts
    معدل تقييم المستوى
    179

    رد: درس اجنبي لنمذجة شخص

    Select the edges along the top and use the Shift+Move technique to create new sets of faces. Make sure the center verts stay at x:0 so that the shirt won't end up with holes in it when you apply symmetry to it.


    When you go into perspective view you'll probably see some problems - certain parts may not have enough edges and others may have too many. To remove a row of edges first select the edges and click the remove button, but THEN you need to go to vert select mode and remove the left over verts that used to make up the edges. Just select any isolated verts and click the remove button.

    To add in new rows of edges, just select the edges you want to make a new edge between and click the connect button.


    Instead of just continuing upwards, at this point I decided to get the neck setup so that I could build between the two.

    I went into polygon select mode, selected the top row of polys and held down SHIFT and moved them up towards the neck.

    Instead of extruding new polys, like what happens when you hold shift on edges, this simply makes an exact copy of the polys you had selected.


    I adjusted the verts so they lined up in the front and side viewports and then went into perspective view and cleaned up their locations.

    In addition to basic clean-up, I also removed a few edges (remember when you remove an edge, you also need to go in and remove the verts too). The amount of edges that were present lower in the torso weren't necessary for the collar.



    At this point I did two things to help me continue working. I applied symmetry so I could judge the total mass better, and I applied smoothing groups so that it wouldn't be faceted anymore. Just do it the exact same way we did above (For smoothing, just select all of the polys and pick a smoothing group number; for symmetry click on the Modifier List drop-down and scroll towards the bottom where it says Symmetry).


    Now to fill the gap between the bottom of the shirt and the collar. Select the bottom portion of the shirt's top row of edges and hold shift and pull them up. Adjust the verts in the front and side views so that they come to the bottom of the armpit.


    Next select just the front and back edges, and skip the edges that make up the bottom of the arm hole. Hold shift and pull just those edges up. Do it again another one or two times as needed, checking both front and side views to line up with the reference, and then the perspective view to more accurately shape it as needed.


    Doing the shoulders and connecting to the collar can be tricky. Instead of bring up an entire row of edges, I selected JUST the edge circled below. Same as always, just hold down SHIFT and drag the edge to create new faces. Then in vertex mode, I clicked the Target Weld button and dragged the verts along the top of those edges to the base of the collar.

    For the two edges shown selected in the image, I used Bridge. When you have two edges selected and you click Bridge it will create a new poly between the two edges.


    Use Bridge on the remaining edges on the front of the shirt and in the back where you can to fill the gaps. Weld any verts together that you need to, and cut in any new edges where needed to make it work

    For this part, I find it's best to just work in the perspective viewport so you have a better feeling for what you need to fix and adjust.



    For the Back, the number of edges didn't match perfectly so I had to do some cutting to make it all fit correctly.


    Now is a good time to look your model over and see if there are any areas that you can optimize. Any place where you've got several edges close together where you could probably do just as good with fewer. Just remember that any edges you remove, you also have to remove any isolated vertices by selecting them afterwards and clicking the remove button.


    If you need to, select all the polys and set them all to the same smoothing group again. Using Bridge tends to add extra smoothing group info that you can get rid of by clicking Clear All and then assigning a smoothing group to everything again





    Onto the Sleeves:
    In Border select mode, click on the edge opening for the arm, and then switch to the front view and hold down SHIFT and pull outwards to start the sleeve.


    I moved the edges down a bit and rotated them to an angle. Then I selected just the top sleeve edges and connected just them. In vert select mode, I selected the new edge vert and connected it to existing verts (make sure to switch to perspective and check the back to make sure to connect it properly there).

    Then in Vertex select mode I moved the vertices around so that they fit the shape of the arm better. Once I had the shoulder started, I selected the border of the sleeve and while holding down SHIFT I pulled it further down.


    Continue working your way down, and use scale on the selected edges when you need to make them smaller because this will make them smaller from other angles as well and reduce the amount of fixing you'll need to do from the top/side views. It's hard to get a good second angle on the arm so you'll have to do a lot of tweaking in perspective.


    Another important thing to take into account is how the arm will deform when rigged and animated. With this baggy simple sleeve, a lot of geometry really isn't needed, but if you have too little geometry in the joints, they will deform poorly. I decided that I needed one more loop at the elbow, so i selected the edges just below the elbow and clicked connect and adjusted the Slide so that the new edge was created near the elbow.



    Time for some optomizing:
    When you're tight for polys, any extra or not-totally-necessary edges are important to remove. The arm has a lot of edges going around it - more then it needs, so I went back in and started welding together any areas that could afford it.


    Do a general all-over pass for anything you can optimize or tweak at this point, and set the smoothing groups on the sleeve.


    Okay, I know this is a big jump... and I'm sorry, but I honestly didn't feel like including a 'how to make a head' tutorial in with all the rest of the stuff I'm covering here. There are a gazillion 'face modeling tutorials' out there already... in fact, I, even wrote one already. So use one of them...

    A few things to point out - There are no holes in this head for the mouth or eyes. It depends a lot on the game, and what the goals are, but a lot of very low-poly characters for games just have the eyes textured straight on the geometry with the rest of the face. Not actual geometry eyes. Having them painted directly in the texture tends to look better with really low-poly characters anyways, plus it uses a LOT less geometry.

    If this character was going to need to talk during cut-scenes, I'd set it up with a mouth that could open and some very simple geometry for the interior of the mouth, but I'm not going to bother with that here.

    One other thing to point out is that I selected the collar of the jacket and pulled in some faces so that it's not just a floating flat poly edge anymore.

    يعتذر كاتب الدرس عن انه قفز وتجاوز مرحلة نمذجة الراس وهذا درس اخر وجدته لنمذجة الراس بنفس الاسلوب lowpoly

    لتحميل الدرس من هذا الرابط

    http://www.tutorius.net/?jgQQOH5P



    So on to the hands:
    Most all of the hands detail is going to be in the texture. I'm going to leave the ring and pinky fingers connected to save polys, and have the hand in a loose slightly-curled position. This is using the assumption that the hand will not be animated. In this position the character can look like it's hand is just relaxed, but it can also look like the character is holding something.

    Off to the side of the character, go to the top viewport and make a box. The box should be short in depth, and nearly square from the top view.

    Select the two edges of one of the sides and connect with TWO SEGMENTS. Go to vertex mode and move the newly created edges so that the first two parts ar about the same size, and the last one is larger.

    Select the three faces that now exist on this side and click the Bevel button and in Bevel Type, choose By Polygon so that it's extruding three separate segments instead of one large one.






    Go into vertex edit mode and adjust the size and shapes of the digits so that they more closely resemble the appropriate lengths for fingers.

    Select the edges of all the fingers and connect so that you now have a new edge in the center of each finger.

    Switch to perspective view and along the top of each finger Cut it so that there are two edges along the top, and it connects to the single edge like a V like in the image below. Do this for each finger.



    Do this again to create the 2nd set of joints on the fingers, then go to the perspective viewport and select all the verts in the lower half of the finger, and ONE pair of verts from the top joint, and rotate the finger downloads (you'll have to move the verts so they line up correctly after you use rotate).

    Do it so it looks like the image below.


    Repeat this on the 2nd knuckle, and do it for the other fingers


    Next select the edges on the side of the hand that would have the thumb and connect them and pull that edge outwards. Select the face where the thumb would extrude from and do a bevel from it. Connect the edges in it to create the joint.

    Use Cut to cut in more detail along the top and bottom of the hand itself. Remember N-Gons are no-nos, so any but funky polys that we created need to be cut up into quads and tris.




    Once you're satisfied with the hand, move, rotate, and scale it so that it fits with the rest of the body. Go to the Hierarchy Tab and click the Reset Transform and Scale buttons, then the Affect Pivot Only button and in the axis number entry at the bottom center of the screen, set X to 0.





    Now you can apply Symmetry to the hand and it'll appear on both sides of the body.



    Now To Unwrap It :
    Most people learn to unwrap all/most of the character on to one huge unwrap sheet. It's how I learned it, and until I actually started working in a real game studio, it was the way I always did it. One big texture sheet is not a very good idea for us though. There are a few reasons. First of all, the largest texture size that we were ever allowed to use
    when working on PS2 was 256x256. The largest texture size we've ever been able to use on PSP is only 128x128. Now when you're texture can only be 128x128 in size, squeezing the entire character into that space will result in very blurry low-res textures.

    So instead, we segment the character up into pieces and each piece gets it's own unwrap and it's own texture. The Shoes get a 64x64 map.

    The legs get a 128x128. The torso gets a 128x128, the arms get a 128x128, the hands get a 64x64 and the head gets a 128x128. Some would argue that it costs more power for the engine to read multiple textures, but that difference is nominal, and when the visual result is significantly better, it's worth it.

    Another reason a studio might have for having each piece have separate textures is if they were using a swappable part system, or customizable characters.

    Then having each piece with its own texture is the best idea anyways.



    So, with this in mind, I split the character up into a few pieces.



    I selected the polys of the feet and it the Detach button. You can name them (I named them "Shoes") or you can leave it alone, it's up to you. I did the same thing with the sleeves, and named them "Arms". Once all the pieces are separated, I got the unwrapping texture ready. I use a simple checkerboard texture. Some people get more elaborate, having multi-colored squares with numbers or letters in them (it makes it easier to see if something needs to be flipped horizontal if you have numbers, etc. in the squares) but in this case, I don't feel anything too special is necessary.

    Open the Material Editor by pressing the M key. Choose any blank material sphere and click the little Square button next to Diffuse. A list will appear and from it, choose "Bitmap" and then it will open the standard windows file finder and you can pick your texture here. Above I have the checkerboard I use, you can save it and use it.




    Once you have the material setup, click the button in the material editor (in row of buttons along top, just under all the spheres) so that the texture will show in the view port. Then Select all of the parts of the character and click the assign button(image 2 below)to assign the material to those objects.




    The result will look something like the image above. The objects don't currently have any UV unwrapping done to them, so everything is a mess. This makes the texture appear all stretched and distorted on the object. Let’s start with the foot again. Select the foot. If you still had the symmetry modifier on the legs and had not collapsed it yet, then you should only have one foot that isn't symmetry here. That's good - we can throw symmetry on this later after we've unwrapped it.
    If you do have both feet, and no symmetry, go to element select mode, select one of the feet and delete it.
    Okay, now, make sure that you click on the word Editable poly and make sure none of the sub-selection types is selected (make sure you aren't in vertex, element, etc. mode)



    Click on the Modifier List drop-down and scroll towards the bottom and find the modifier called "Unwrap UVW". It should look like the image below, with a + sign in front of the word Unwrap UVW. Click on the plus sign to expand it and see the sub selection options.
    IF YOU DON'T HAVE A PLUS SIGN that means that when you applied the modifier, you were in one of the sub-selection types for edit poly (you were in vertex select mode, or one of the others). Just delete the unwrap modifier
    and do it over, making sure you aren't in any of the sub-selection modes.

    Once you have the Unwrap modifier on, Scroll down enough until you see the big Edit button. Click this button and it will open a window that shows you what your unwrapped UVs look like. Right now it probably looks like a mess, but don't worry. If you have dual-monitors, it's best if you can put this window on the other screen. If you don't, size it to a shape that you can work with it, but still work in the main max window. If you have to, minimize the edit window and then open it back up when you are ready to use it.

    If you scroll further down in the unwrap modifier you'll see a section of Map Parameters. We will be using Planer and Cylindrical fur this character.

    Make sure you are in Face select mode under Unwrap UVW and select the polys of the bottom of the shoe. You can toggle between solid red and slightly opaque red by pressing the F2 button. This will allow you to more easily see what polys you have selected (solid red) or make it so you can see the checker texture that's applied to the polys (opaque red).



    Once you have the polys selected, click the planar button. A yellow square will appear around the selected polys. It may be on the wrong axis though, so click the Align X, Y, or Z buttons until you get the planar on the correct axis.
    While the Planar button is still active (yellow) you can manipulate the yellow projection square's size, angle, and location with the normal move, rotate and scale tools. Scale the box until it looks like it's a perfect square (don't worry about being a perfect square, but you do want it square). If you got to the opaque red (F2) so you can see the checker texture, you'll see why it's important to get the projection gizmo to be a square. If the gizmo isn't square, neither is the texture. When done adjusting the gizmo, just click the Planar button to deactivate it, and then you can select more faces.




    Next I selected the polys that make up the heel and applied a cylindrical map (click the Cylindrical button). Change the Axis that it's aligned to until you find the right now. Now move and scale the gizmo (just use the regular move and scale tools) so it's on the heel correctly. Toggle F2 to see the checkerboard texture, and scale the cylindrical map gizmo until the checkers are squares. When done, click the cylindrical button again to deactivate it.



    Next I selected the rest of the shoe and did a planar map down the center of the foot. Again, toggle between F2 so you can see the texture and scale the gizmo so that the checker texture looks square, and the squares are approximately the same size as the squares on the rest of the shoe.


    And finally, I selected the top of the shoe and did another planar map on it. Rotate the plane so that it's going at about the same general angle as the top of the foot. Now that we've done all of the projections we can go into the Edit window and start moving the UVs around themselves.
    Along the bottom of the Edit UVWs window should be a bar that looks like the one below. I've circled the things that you'll frequently use from this window.




    When you first go to edit the UVs after having made several projections, most everything will probably be overlapping. If you check the "Select Element" option, and select just a single vert of an unwrapped part, it will select the entire part automatically. This makes it easy to then move that piece away from the mess in the middle, so you can separate everything and start working on it. When you're ready to edit the individual UVs (vertices) make sure to uncheck this option.
    The Rot. +90 and Rot. -90 options are often useful for rotating and entire object a set 90 degrees in one direction or another, so they're useful too.




    There is also a set of buttons along the top of the edit window. Move, Rotate, Scale are pretty self-explanatory. The 3rd button (highlighted in the image below) is Freeform Mode and basically allows you to move, rotate, and scale, all in one, depending on where you click on the gizmo that appears. It is a very useful tool. It also gives you more control when scaling something.

    Next to the Freeform tool is Mirror. The default will flip your selection horizontally. If you hold down on the button you can choose to flip vertically instead.

    And further to the right in the windows is a box icon with checkers on it. Right now your edit window probably has the checkerboard texture in the background and it's making it difficult to see the UVs. If you click this button, it will turn off the texture preview in this window.




    التعديل الأخير تم بواسطة ام اياد ; 09 / 05 / 2011 الساعة 21 : 06 AM

  3. #3


    الصورة الرمزية ام اياد
    الإشراف العام

    الحالة
    غير متصل
    تاريخ التسجيل
    Jul 2007
    الدولة
    مصرية في الامارات
    المشاركات
    7,307
    Thanks
    0
    Thanked 3 Times in 3 Posts
    معدل تقييم المستوى
    179

    رد: درس اجنبي لنمذجة شخص



    If you're still in Face select mode under the Unwrap VW modifier, switch to Vertices now. I started out by selecting each part by element and separating them in the window space so I could sort them out. Then I turned off select by element. I moved, rotated, and scaled (I used the freeform tool) the cylindrically unwrapped heel so that it lined up with the side unwrap of the main shoe. I used Target Weld (Ctrl + T or Tools > Target Weld) to connect the edges together.
    I also freeform moved the top of the shoe so that it lined up with the side of the shoe.
    Since I have no need for the heel to be totally unwrapped like that, I'm going to select half it (the part circled in red) and detach it from the rest of the heel (Ctrl+D or Tools > Detach Edge Verts) and then Flip it horizontally and move it over top of the other half of the heel.


    Using Target Weld (Ctrl+T) I attach all verts together that are close and should share UV space. This helps me line up seams in the texture later, as well as keeping my UVs clean.


    Once I've got all the pieces cleaned up and welded together the way I want, I move, rotate and scale all of the pieces into the bold square. This is the space that will make up the actual unwrap, so everything needs to be inside this square. Now all that's left is to render out the UV Template to an image so that you can open it in Photoshop. To do that, go to: Tools > Render UVW Template
    A Render UV's window will pop up. Change the Width and Height to whatever size you want (The textures should be twice that of the res you intend to use in the end. Since I plan for my final texture for the shoes to be 128x128, I made it render the UVs at 256x256.
    I also changed the color for the Seam Edges to white (it defaults to neon green).
    Click the Render UV Template button and the Render Map window will pop up. Click the little Save icon (looks like a floppy disc) and choose where you want to save it, name it, and pick a file format. We always use TGA files since you can save an alpha channel in them, so that's what I'm using here (32 bit means it's saving an alpha channel).


    Once you've done this, you are finished unwrapping the foot so you can close the edit window. Click on Unwrap UVW so you're on the top of the stack and from the Modifier List scroll towards the bottom and find Symmetry. Choose the correct axis to mirror from and once the shoes are mirrored properly right-click on the modifier Symmetry in the modifier stack and choose Collapse All from the drop-down.


    Next let’s select the Leg. With Editable Poly selected (but none of it's sub-selection types, and not the symmetry modifier on top) add a Unwrap UVW Modifier to it, but UNDER the symmetry modifier. Click the + button next to Unwrap UVW and select Face selection mode. Select the entire leg and click the cylindrical button.


    While the Cylindrical button is still active, move, rotate, and scale the projection gizmo so that it matches the leg better. Make sure it's tilted well from both front and side angles. Also make sure to check whether or not the checker texture looks square. With a leg you will always get a little distortion variation but try to get it so at least most of it looks fairly square.



    Now Click the Edit button to open the Edit UVs window and switch to Vertices select mode under the Unwrap UVW Modifier. Chances are you've got some tags sticking out on one side or the other of the unwrap. The goal is to have the seam going down the inner side of the leg, and have no little bits sticking out. Select any tags and detach them (Ctrl+D) and move them to the other side and weld them in (Ctrl+W).
    Also, if the place where the seam is from the start, is somewhere other then the inner leg edge, select the row of faces and move it to the other side so that the seam is moved. When you're done it should look something like the image below.


    Again, Render a UV Template and save the file. Close the edit window, and right-click on the Symmetry modifier and choose Collapse All.

    Next is the torso:

    For the torso, we'll do it a little different. Instead of unwrapping and then adding symmetry on top, we'll unwrap the whole torso already mirrored. So you can right-click on the symmetry modifier and collapse all right now.

    It's a lot easier to hide symmetrical textures on the legs or shoes then it is to hide them on the front of a shirt. Perfectly symmetrical cloth wrinkles on a shirt front often look bad, so we're only going to mirror portions of the texture.
    Start out by putting an Unwrap UVW modifier on the torso, expand the + sign so you can select Face, select the entire model and click the Cylindrical button. Move and Scale the gizmo so that it fits the torso as best as possible.


    Next change to Vertices select mode, and click the Edit button. My plan is to mirror the sides and the back, but leave the front as it is. First I selected half the back, detached it (Ctrl+D) and then Flipped it horizontally and moved it over top of the other half of the back.



    Next I selected the half of the side on the right that I wanted to share UVs with the other half. I Detached them (Ctrl+D) Flipped them horizontally, and moved them over to the portion of the other side that matched them.


    There was one more thing I needed to tweak on it before I could consider it done. The faces that make up the shoulder are very small in the UV unwrap because they're at an angle from where the projection was coming from,
    so they're very stretched in comparison to the rest. So I selected the verts of the collar and pulled them upwards to increase the length of the UVs for the shoulders.



    Once I'm satisfied with the unwrap I fit it into the square, render a UV image, save it, close the edit window, and right-click on the Unwrap UVW modifier and choose Collapse All.


    And now we move onto the Arm :

    So select the arm. It should be by itself since we detached it from the torso. You can wait until you're done with the unwrapping to put a symmetry modifier on it. For now put the Unwrap UVW modifier on it from the Modifier List, expand the + and click Face selection mode and select the entire arm.



    Click the Cylindrical button. None of the automatic axis will actually line up with the arm's angle. Instead rotate and move the gizmo until it's about the correct angle and then click the Fit button and it'll hug the arm better. Check from multiple angles to see if you're getting the best angle on the arm. Also remember to scale (make sure it's set to scale on Local Axis) so the checkers are closer to square.


    When you've got the gizmo to the best size and shape you can, click the cylindrical button again to deactivate it and click the edit button to open the UV Edit window.

    Just like with the pants, the edge that's in the center of the inner side is the one that we want the seam to fall on.
    Go to vertices selection and select any faces that are on the wrong side of the seam that should be on the other
    side, Detach (Ctrl+D) and Move them to the other side.


    Clean up any stretching or squished areas, and when you're done, freeform transform it into the square, render the UV texture out, save it, close the edit window, and collapse the stack.


    Onto the hands!

    The hand will be much harder to unwrap then the previous objects we've done up to this point. It has a lot more little tweaking. Just use all of the knowledge that you've gained up to this point on the previous parts and do your best. And remember, it never hurts to just start over on the unwrapping. You learn from every mistake you make. Here's basically what I did...
    First I selected the body of the hand (both top and palm) and did a cylindrical map. Rotated, moved, and scaled the gizmo till it fit around the hand like in the image below.



    Next I selected all the fingers and did a planar map on them all at once. I Clicked the Edit button to open the edit window. In the main view port I selected the top of the hand and all the fingers like in the image below. The in the Edit UVs window, I Detached (Ctrl+d) the selected faces from the rest of the hand, flipped them horizontally, and moved them off to the side.


    In vertices select mode, I moved and target welded the palm and top of hand so that they were connected along one side (the side opposite the thumb). Then I did the same with the fingers, scaled the fingers down so they matched up with the palm of the hand and lined them up next to each other.



    I moved, and target welded the vertices until I had the whole body of the hand and the fingers combined together in one unit.


    For the thumb, I did two planar unwraps. It seems like a cylindrical map would work, but the thumb is just such an odd shape and curves in an odd fashion that it makes the cylindrical map more of a headache to deal with then just combining two planars. Don't worry if edges don't line up very well, and don't be afraid to move things around a lot. They'll still look okay in the final texture as long as you keep the general size and shape so the faces close to their original unwrap.



    Once I had both the hand and thumb unwrapped, I combined them together to reduce the number of seams. It's best if you can get the top of the thumb/hand combined together and leave the seam in the palm since it won't be as visible there.


    Once I was finished, I used the freeform tool to scale the hand to fill the entire box. The hand is really stretched by doing this, but my intention is to have the hand be a rectangle rather then a square texture. To do this, in the Render UVs window, I enter the dimensions 256x128, and when I click the Render UV Texture button, the map it generates is rectangular instead of the stretched square.



    Hands are done! All that's left is the head:

    Once again - same-o-same-o. Select the head, put on an Unwrap UVW modifier, expand the + and choose Face selection mode, select the whole head and click the cylindrical button. Move, rotate, and scale the cylindrical projection gizmo using the normal move rotate and scale tools, until the checkerboard texture looks best.


    Click the Cylindrical button again to deactivate it, and click the edit button. By default it will look something like this:


    To conserve texture space, we'll want to mirror the whole head. If you really need to do some asymmetrical texture work for the head (like if the character had a big scar or something) then you may want to leave some areas un-mirrored. But for this, we're just going to mirror everything that can be. So switch to vertex selection mode, select half the back of the head, Detach (Ctrl+D) Flip it horizontally, and move it over top of the other half of the head.
    We also need to avoid any over-lapping areas. The ear has several parts that overlap others, so just grab the vertices and pull them outwards so that nothing is overlapping anything else.




    Now do the same thing for the face. Select down the center, detach (Ctrl+d) flip it horizontally and move it over top.

    When I mirror UVs, I usually select everything and do a Ctrl+W to weld the two halves together. You need to be careful when doing this in areas with lots of detail to the mesh (like the face). If I selected the face and did a Ctrl+W it actually welds together some UVs that it shouldn't! This causes nasty distortions in the unwrap. So be careful to watch for problems like this!


    All that was left after this was to adjust the top of the head so that it would deform as best as I could get it to. My intention is to do some polygonal hair with opacities, but when I do it that way, I still find it a good idea to have a hair texture on the scalp under the hair. I also flipped the whole head because I'm just used to working on them in this way. So just fit the head into the square, render out the texture (Tools > Render UVW Template) set the size, click the button, save the file, close the edit window, and collapse the stack! Done! Fww!



    So these are the unwrap textures I've saved at this point:


    Setting up the Photoshop file with UV ref:

    I'm going to explain two ways you can do this... I can think of at least two more in addition to these I'll explain. (It's amazing how you can do most anything in Photoshop at least two or three different ways....)

    If you didn't save with an Alpha / didn’t use TGA format:

    1. Open the file in Photoshop
    2. Click on the Background layer and drag it to the new layer icon (this will duplicate the layer).
    3. Go back to the background layer, set your background color to white, Select All (Ctrl+A) and Delete (Del).
    4. Go to the Background layer copy. Choose Image > Adjust > Invert.
    5. Choose the Magic Wand tool and in the menu bar along the top of the screen uncheck anti-alias, uncheck Contiguous, and set Tolerance to 0.
    6. Click anywhere on the white part of the image and Delete.
    7. Rename the layer to UVs or something similar

    If you saved your images as TGA files with Alphas (32-bit:

    1. Open the file in Photoshop.
    2. On the Background layer, select all (Ctrl+A) and Delete (Del) and it will replace the whole thing with whatever the background color you have selected (preferable white right now).
    3. Go the Channels tab. You should see 5 channels, the RGB, Red, Green, Blue and an Alpha channel. Hold Down Control and click on the Alpha Channel.

    4. Go back to the Layers Tab, Create a new layer.
    5. Select BLACK as your foreground color, right-click in your image anywhere and choose FILL from the drop-down.

    Go back to the Channels tab, click on the Alpha channel, and drag it into the trash-can at the bottom of the channels window.

    This is just a precaution, but it's a good idea to do it now rather then have something mess up later (if you load a texture with an alpha channel on it, in max, it may assume that you want to use that channel as the alpha and you could end up with some stupid headache when you render - just easier to fix it now to avoid a problem later).



    So now it should look like the image above. Name the new layer whatever you want (I usually go with UVs or UV Ref, or something along those lines).

    Now save the image as a PSD file.
    Texturing the Head:

    The technique I'm going to cover here works for making a low-res real-time head texture. If you're intent is some high-res, high-poly head with a 1024x1024 res texture map, there are different techniques that I'd use. But when you're end result is gonna be small, there are some tips in here that will get a better result.

    Start by getting some photo ref. It's really best if you can find front and side views of the same head with the same lighting so you don't have to try to match the skin tone too much.

    This is the one that I've decided to go with. These images also came from 3d.sk - All the Human Photo References and Textures 3D Artist Wants. Like I said at the beginning of the tutorial - this is a seriously awesome site full of reference and texture good-ness. I HIGHLY recommend getting a month's subscription and snagging as much from it as you can manage. It's so nice to be able to start texturing and not spend several hours Googling and sifting through photos and textures on the net to try and find something almost useful. It's much easier to just open my local texture storage (basically a download of large portions of 3d.sk) and find what I need within minutes.
    click to enlarge

    First let’s set max up with our work-in-progress texture. In 3dsmax open the Material editor and choose a slot that doesn't have any texture in it right now (blank gray sphere). Click on the box next to Diffuse and choose Bitmap from the window the pops up.

    From the select bitmap image file window, set the Files of Type: to All Files, or to Photoshop files. Either is fine, so long as you can find the PSD file with your UV template that you saved earlier.

    After you click Open, a PSD Input Options window will pop up. Just leave it on the defaults (collapsed Layers) and click OK.

    Click the button in the material editor (in row of buttons along top, just under all the spheres) so that the texture will show in the view port.

    Then Select the head of the character and click the assign button to assign the material to that object.

    Making the Texture:

    Go back to Photoshop now and click on the background layer so that you're under the UV ref layer.

    From your reference image of choice, make a selection around the eye, copy, and paste it into your texture work file. Right-Click anywhere in the image and choose "Free Transform" to be able to quickly scale and rotate etc. the pasted image.

    Move and scale the pasted eye so that it lines up with the UVs of the character's head. Next go back to your reference image and make a selection around the nose, copy, and paste it into your work image.

    I copy each piece of the face separating because it gives me more control over scaling and moving those parts to line up properly to the UVs. It's rare that you'll be able to copy an entire face onto your UVs and have everything line up and be the right size, right off the bat.

    While doing this, save your image and go back to 3dsmax to check on the placement of things. It should refresh the texture automatically every time you save your PSD file.


    Do the same thing for the mouth and check your progress in Max. Make sure that the mouth actually falls in the correct parts of the geometry on the 3D model. If it goes too far past the lip or doesn't line up with the crease between lips, go back into Photoshop and scale/move things around some more.

    Once the majority of the face is down, I copied the side angle of the head and scaled it so it was approximately the correct size and shape. Now to open one of Photoshop’s most helpful tools when making textures from photo reference....






  4. #4


    الصورة الرمزية ام اياد
    الإشراف العام

    الحالة
    غير متصل
    تاريخ التسجيل
    Jul 2007
    الدولة
    مصرية في الامارات
    المشاركات
    7,307
    Thanks
    0
    Thanked 3 Times in 3 Posts
    معدل تقييم المستوى
    179

    رد: درس اجنبي لنمذجة شخص

    Liquify:

    Go to Filter > Liquify... (Ctrl+Shift+X) and wait a moment for it to load (it always takes a bit). First thing you'll want to do is check the Show Backdrop option, Use: All Layers, and Mode: Behind.


    The image below has all of the important areas circled. You'll just use the default tool, but you can feel free to experiment with the others. The great thing about Liquify is that it lets you nudge around things without blurring the image. The brush size is really sensitive. Change the brush size as needed and move stuff around.


    When you're done in Liquify, just click OK and it'll update your main work image in Photoshop. Save and check stuff in 3dsmax to see if anything needs nudging in different locations. I did this and I saw that the ears were still a little messed up, and the hair line needed some work.


    So I went back to Photoshop, did Liquify again, and adjusted the shape and alignment of the hairline so that it'd display better on the actual model.


    Okay, now its time to clean up some of these overlaps. Often times, using the Eraser with a fuzzy brush, and going over the edges of each layer are enough to blend things together quite nicely. If you need to, you can use the Clone Stamp Tool as well.


    And another save and check in 3dsmax. Everything seems lined up good. The forehead still needs some work, but I can clean that up later when I start doing manual touch-ups. I decided that the eye layer could probably be stretched a little bit in width (eyes looked a little small anyways) and it'd fill that annoying gap without having to mess with the clone stamp tool.


    At this point I copied the neck from another reference image, and the back of the head from yet another. Use Liquify where needed to nudge things into place, and erase to smooth the transition between layers.


    The picture that I had as reference for the back of the head was actually taken from a different person and the skin tone didn't match. It's common that you'll have to piece together the facial texture from several sources and getting the skin from each piece to match can be a real pain. But there's one quick trick I've found that works most of the time.

    Ok, so you've pasted the piece onto a new layer. Go to Image > Adjust > Match Color and a window will come up. In the bottom portion of the window is Source and Layer. From the Source drop-down choose the image you're working on now. Now from Layer pick a layer that you want to match.

    Since the layer I added had hair, and skin, I want to match it to another layer that has both hair and skin (the one I sampled from was the forehead/top hairline). This way it will match better.

    If you need to, adjust the Luminance, Fade, etc. Match color doesn't always work, but it usually gets pretty close.


    So just continue grabbing pieces of photo ref, use match color and Liquify when needed, and check 3dsmax frequently to make sure things are matching up.

    This is the base texture I ended up with. At this point I *could* be done. But I'm not. Now I'm going to go in and manually paint in some details, sharpen some areas, and apply general touch-ups all over. Since this is a low-res texture, and the character will usually be seen from a distance sharpening some features usually gets a better result.


    At this point, I selected all of my face layers and merged them together. I created a new layer on top of it (but still below the UV ref layer) and selected the Paintbrush tool. In the options set the Opacity to around 50% and choose one of the solid round brushes.


    Holding down the Alt key will switch your tool to the eyedropper so you can pick colors quickly and easily. While painting you will frequently need to pick colors from the image so just keep your finger on the Alt key for easy switching.

    The texture as it currently is freaky on the forehead when I actually check it in 3dsmax, so the first thing that I touched up was the forehead.



    Hold down Alt and pick up some skin tone. Now, just paint over the problem areas with larger brushes. Since the brush is set to 50% opacity, you can get in-between colors by doing a singe brush pass over an area, and then using Alt to pick the new color. Do this over and over and make layers.

    For smaller details, switch to a smaller brush size. I defined the hair line by just picking a black-ish color from the hair and painting in better hair roots.

    After the forehead, I turned my attention to the eyes. Using the eyedropper I picked the 'white' of the eye. But then I went into the color picker and went brighter (still not actual 'white' but a lighter color then the one there) and painted in the whites of the eyes better.

    I picked lighter skin tones and increased the contrast around the eyes and the wrinkles, and I sharpened up the eye brows.


    I checked the progress in 3dsmax and deiced I still needed more definition to the forehead. Went back in and did some more touch-ups to the hair line and checked it in max.

    My plan is to make some alpha poly hair once I'm down with all the textures, so this is just the under hair, but it still needs to look good on the edges and hairlines.

    As another example, just compare the eyes of this version with the texture before any manual touch-ups (just above). The eyes stand out much more now. So, even small touch-ups can make a big difference.


    Touch-ups on the nose and lips can make a BIG difference in the final look so they're important.

    Usually the first thing I do is fix the nostrils (they usually aren't shaped correctly to appear in the right location on the actual model. Just make adjustments, save, check, and repeat until they look correct in max).

    I made the base/underside of the nose darker, increased the contrast between the bridge of the nose, and the shadow on the sides of it. I adjusted the highlights on the outer nostrils, and drew in the crease where the outer nostril meets the cheek.

    For the lips, I find it's best to make the top-lip almost solid dark. I drew in highlights along the top of the lip, and the highlights on the lower-lip. I also darkened up and created a more solid border below the bottom lip.


    I find that I often get better results on skin if I use a small brush (usually the solid round 3) and 'scribble' in some areas. You don't want a really smooth look on the skin because it'll look fake.

    Again - save often and check your progress in 3dsmax. Already the face is looking much more defined then it was before the touch-ups with minimal work.

    At this point I just finished up the rest of the head. I did a lot of touch-ups on the ears, since they weren't lining up perfectly with the model, and defined the hair better. I also went in with a lighter color of the hair and added highlights.

    Since the plan is to make poly hair later, all that I really care about is if the hair edges look correct, but it’s still good to get it all looking as good as possible.

    The last thing I do to any texture for low-res real-time is apply sharpen to it. Flatten the image and go Filter > Sharpen > Sharpen. Then go to File Save As...and save your texture as a .tga or whatever format you want to use for the final texture.

    When you go back into max, edit the material for the head (click on the box next to diffuse and change it from the PSD to the new flattened image you just saved).

    Comparing the end result now with the way the head looked before I started any manual touch-ups really makes it obvious how big a difference it can make.


    Onto the Clothing:

    I do clothing differently then I do faces. I lay down a base texture and it's usually extremely plane and flat. I'm not looking to get any shades or wrinkles in the base texture. Just the actual 'texture' of the fabric, and maybe things like seams, pockets, zippers, etc.

    Once my base is down, I go in and paint in the wrinkles using multiply and screen layers, which I'll cover later.

    Okay, so I'm moving onto the pants next because I know exactly what I want for them (jeans). Good reference images are very important to make jeans actually look like jean. Getting that "jeans" look is not hand-painted easily. I had these images that I used to grab my textures from. Again - they came from 3d.sk - All the Human Photo References and Textures 3D Artist Wants! Ha-ha - I'm a walking advertisement for this site, I swear... But this just goes to show that it's worth subscriptions. Every texture I've used on this guy was from that site, so I highly recommend it.

    click to enlarge

    The image may be of a jean skirt but it actually made it even more perfect since it has a lot more surface to grab texture from.

    Open the UV layout texture for the pants, set it up just like we did with the head so that your UVs are on a separate layer with a blank background and save it as a .psd file. In 3dsmax open the material editor (m) and setup one of the blank material slots so that it's pointing to the PSD file you just saved and apply that material to the legs.

    Back in Photoshop, copy portions of the jeans and edit it so it fills the whole background of the image. After I'd managed to get a solid backdrop of 'jeans' cloth, I started copying in seams and other details.

    Remember, if you are having trouble lining anything up with the edges/seams of your UVs, that you can use Liquify (Filter > Liquify) to nudge/curve parts so that they fit better.

    I found myself frequently sharpening things as I copied them in and scaled them. Especially, the seams.

    Like I said earlier, we are not aiming for any cloth wrinkles here - Not yet! So try not to get too many of those. We just want a simple base to work from.


    Remember to check your progress in 3dsmax to make sure you're lining things up correctly. Make sure you're getting the seams in locations that you actually like and make sure things aren't being stretched / squished.

    Once the base is done, I start painting in the wrinkles.

    I start by setting up my layers. I create (at least) two new layers above all my jeans and seam layers. I have a Highlights (HLs) layer and a Shades (Shds) layer. I set the HLs layer's Mode to Screen and the Shds Mode to Multiple.

    When a layer's mode is set to screen, you can paint with solid colors, and it makes it look more like you're using the dodge tool directly on the layer. The bonus is that you can use smudge, etc. on what you paint, without messing up your base texture. Screen brightens, multiply darkens. That's the basics. You paint with shades of grays/tinted grays to vary how dark or light it makes it. Pretty simple, and very useful.

    I find it's best to have a reference when painting cloth wrinkles. You'll have a much better idea of what to aim for and where to put things if you have a real-life equivalent to look at as reference. I had this image (above) open on my secondary monitor while I painted the wrinkles in Photoshop.

    I start out very messy. Scribbles to lay out my plans. You can also use this as a quick way to check to see if things are going to look correct in max. Get down the basic idea first, save, check 3dsmax and if something’s not right, you haven't done too much work yet, so its not such a big deal to go back and change/fix anything.

    Use darker tones (like a dark gray-blue) on your Shds (multiply) layer and be afraid to vary it some. Pick a lighter shade of dark blue-gray for some details, and add in darker shds in bigger wrinkles.

    Then I go in with the Smooth tool and blend things together better. I smooth out the scribbles so that they look like actual clothing wrinkles, save it and preview it in 3dsmax.

    So once I checked out my work in max, I found a couple areas I didn't like. I didn't like the wrinkles in the knees or the way the cloth looked on the thighs so I went back and fixed those up.

    Then I moved onto the back of the legs. I use a different reference image (same model, just a rear view) so I'd get better cloth folds.

    Again - messy quick strokes to lay out my plans and get things to a point where I can check in max to make sure they're lining up properly.

    Smooth it out, check max, make any adjustments you need to make. I actually felt that it had slightly too much contrast so I reduced the opacity of the HLs and Shds layers. When you're good and done flatten the image (Image > Flatten Image), apply add sharpen to it (Filter > Sharpen) and save it as a .tga or similar format.

    Moving onto the shoes:

    Open the UV Rendered texture for the shoes and set it up just like the others (set the UVs up on their own separate layer, rename it, and save the file as a PSD). Set up a material in max for it and assign it to the shoes.

    Once again, the photo ref you can find will play a big role in getting a good result. With the shoes, I laid down a base from photo ref, but ended up painting over almost all of it, using the photo base as a reference and color palette.

    Pretty basic idea - just copy the reference images, move, rotate and scale them so that they're located as close as possible to where they need to be.

    Shoes are a prime example of Liquify being super-useful. Go to Filter > Liquify and nudge, push, and pull the shoe so that it more accurately matches the UVs. You'll need "Show Backdrop" checked, in order to see the UVs to match.

    Copy the other parts of the shoe into place, use the clone stamp tool where needed and use Liquify to get things into place better.

    Once you have the whole shoe covered in texture, check 3dsmax to see how things are lining up. Because of the way the UVs are setup you are going to have a very noticeable seam along one side of the top of the shoe. This is something you'll need to take into account as you continue to work, and when you're painting over the reference images. You'll have to make sure that the exposed edge of the top shoe UVs matches the side that's connected to the rest of the shoe.

    For the bottom of the shoe I once again used the Liquify filter to get it to actually line-up with the bottom shoe UVs. Once I was done with laying out all of the shoe's base textures I filled the background layer with a dark grey from the shoe and created a new texture on top of everything (but below the UV reference).

    Okay, once again I used the paintbrush tool with a solid round brush, and opacity set to around 50%. I used a larger brush at first to get in some larger areas of color on the trouble areas like the tops of the foot, and the toe of the shoe. I used a smaller brush (usually size 2 or 3) from then on though. For the seams I highly recommend going on another new layer and after you've painted in some of the seam edges, do a Filter > Sharpen > Sharpen on them and you'll get good results. To get the noise I want in the final texture, I used a lot cross-hatching sort of coloring. I also painted in the laces manually myself.

    Remember to pay attention to the exposed seam and make sure it lines up correctly in 3dsmax.


    When I was satisfied with the texture, I flattened it and scaled it down. The image that I created my texture at was 256x256 but my final image was half that. Image > Resize Image and change the values to 128x128. Now I applied a Sharpen (Filter > Sharpen > Sharpen) and saved it as a .tga file.

    The shoe geometry is much smaller then the rest of the model so it really doesn't need a texture the size of the rest of the parts, but I still prefer to make the texture at a higher res and then size it down to get in more detail.


    Onto the Jacket:

    I did the shirt a lot like I did the pants. First I laid down a base texture layer with no shades or wrinkles, etc. Put in details like pockets and a zipper, and once I had that done, THEN I went in and added wrinkles the same way I did the pants.

    I did do one thing significantly differently with the torso then I did with the pants. I put seam detail myself to emphasize the seams. After making the base texture above, I switched to the Pen Tool and drew in lines for all the seams. They'll be on their own layer so create a new layer above your base texture and choose a darker color from the image and then in the color picker make it even darker. This will be the color of the seams.

    Pay attention because if you've never done this, it's easy to miss this and get confused. Right now the lines are just vector paths. They aren't actually apart of the image yet. We are going to "Stroke" the paths with the paintbrush tool. But first we need to set the paintbrush tool the way we want it. So go to the paintbrush tool, set the brush size to 1 or 2, and set the opacity to 100%.

    Now select the pen tool again and Right-Click anywhere in your image and choose Stroke Path from the drop-down.

    From the window that comes up, choose Brush from the drop-down, make sure that simulate pressure is NOT checked and click OK.

    Now we're going to make the highlights around the seams. Right-click again and choose Delete Path from the drop-down. Now with the pen tool draw in a few areas where there would be highlights on the seams. Create another new layer and set your current color to a lighter version of your main color (near white-ish if necessary) and stroke the new paths.

    Once I was happy with the seams, I created two new layers, a Shds and HLs layer. (Shds Mode set to multiply, and HLs Mode set to Screen) and began painting in wrinkles just like I did earlier with the legs.

    Having a reference of what the wrinkles should look like well be very helpful here so if you can find one, that's best.

    Just like with the pants, I started out with rough scribble marks to get the shape started and laid out. Then I went back in and smoothed them out. The jacket has a seam that you need to watch for. Since the front isn't mirrored (to avoid overly obvious symmetry in the texture) one side is exposed here. You'll need to make sure that the seam on that side of the short isn't too obvious.

    Once I had the shds in place, I put in the highlights. Same as before - scribble placing and then smoothing and putting in details.

    Once I was done with the shades and highlights I did an extra step. I created another layer above them all and picked a dark grey / grey-bluish color and painted in around some of the darker shaded areas, and then went in and smudged them to blend it with the colors behind. This was just to give it some better color depth.



    Now to do the arms:

    Since the arms are a part of the jacket, you should make sure to do them very similar so that they flow together. So you'll use a lot of the same base texture on the sleeve that you used on the torso, and do your shades and highlights in the same color/lighting.


    Same as all the other things. And when everything is done, save it as a flattened, sharpened, tga file and update max again.

    And finally the hands:

    The hands will be like the shoes. I used photo reference on the bottom, but it was mostly just for color and basic reference. It’s very difficult to get photo referenced hands to line up properly with boxy, low-poly unwrapped hands, so most everything will end up being hand-painted. Here’s a picture of my process:

    First I filled the outside of my UV ref with a skin tone so I could see better where the fingers were.

    I copied, moved, scaled, and used Liquify to get a palm and hand-top into basic locations.

    Then I created layers overtop of all that and painted the hand texture. The images below made good reference for color, etc. but hardly any of it is showing through in the end.

    And when I was finally finished, I sharpened the whole image.


    The Hair:

    Okay, first off, at work we don't actually have hair like this. Our hair is very basic and usually just painted directly onto the head itself. Simple short hair cuts. With women, even then the hair is usually a part of the head mesh and painted directly onto the head texture itself.

    But I'm making this tutorial for a more fancy kind of hair because it's something I get asked a lot.

    This is just one possible way to make hair. There are many different ways to approach making hair, and there is no One Right Way to do it. Just many options depending on what your end goal is.

    First I made a new document in Photoshop; 256x256. I got some photo ref of some hair I wanted to make it look like and pasted some bits into the new window.

    Use the Liquify filter (Filter > Liquify) to move anything around that needs moving.

    I painted below the hair bits first to match the general color and then created a layer above the hair and painted with a small brush and around 50% opacity.

    Just keep painting in details and strokes. Use the images as reference.


    Basically I make several shapes of hair that I know I'll want to use in different locations on the head. It's good if you plan out the hair style and the sort of shapes you'll need before you start all this so that you can make the texture fit what you want.

    Once I had the base hair texture done, I used the pen tool to create the basic outline of the shape.

    When you've got the shape done, right-click in your image and choose Make Selection. Go with the defaults on the window that pops up) Feather Radius should be 0) and click OK.

    Now go to the Channels tab and click the Save Selection as Channel button (circled below).

    It should create a channel called Alpha 1. The background should be black, and the area you had selected should be white. Click on the Alpha channel to activate it. You can paint directly on the channel with the paintbrush tool just like a normal layer, except it will actually be affecting the opacity alpha instead.

    Use the paintbrush tool with opacity around 50% and with small brush size and modify the hair's alpha to be more 'hair like'.

    To go back to viewing the regular image, just click on the RGB channel. If you make additional selection with the pen tool and then convert to a selection you can add it to your existing alpha by just selecting the alpha channel, setting your color to white, and choosing Image > Fill.

    Once your texture is done, Flatten it (Layer > Flatten Image) and save it as a .tga file. IT IS IMPORTANT that you save it as a .tga file. Tga files save alpha information, so it will keep the black and white alpha channel you created.

    Now go to 3dsmax and open the material editor (m) and pick an unused slot (one of the grey spheres). Click on the box next to Diffuse and choose Bitmap, just like before. Find your TGA texture and click ok. Now go back to the material main options (click the button circled in the image below).

    Check the 2-Sided option, and then scroll down to the rollout for +Maps and expand it.

    In the Maps rollout you should see the Diffuse Color has a Check next to it, and lists a map. All of the rest should say none under Map. Click on the Map button for Diffuse Color and Drag it to the button next to Opacity that says none.

    A window will pop up, make sure you set it to Copy, not Instance.

    Now click on the new map in Opacity and it will let you go in and edit it.

    Set the Mono Channel Out put to Alpha, and set the Alpha Source to Image Alpha. If these options are grayed out that means that the alpha channel didn't save with the TGA file. Go back to Photoshop and make sure it saves correctly.

    No go back to the main material settings and click the Show Map in View port button.

    Now I changed my view to the Front view and went to the create tab and made 3 plans with 0 segments.

    I assigned the hair texture I just made to all 3 planes. Switch to the Perspective view port. If you just see wire frames hit the F3 button so you see the textures. If you don't seeopacity Right-click on the word Perspective in the top-left corner of the view port and go to Transparency > Best.

    All three planes should now show the entire hair texture on it with opacity. What we want to do is separate it so that each plane only has one section of hair, instead of all three.

    Select one of the planes, right-click on it and choose Convert to > Editable Poly from the drop-down. Now go to the Modify tab and apply an Unwrap UVW modifier to it. Click the edit button and move the UVs so that it's only over one of the hair pieces. If there is a little overlap and some of the neighboring pieces is visible, that's ok, we'll cut it out in a minute.

    Once it's all set, collapse the stack.

    Repeat this on all three segments. For any areas where there is overlap and you can see portions of one of the other pieces, go into vertex selection mode of the editable poly, and use Cut to cut the plane so that it's closer to the shape of the hair piece. Select and Delete any polys on the edge you don't need anymore.

    Now, use Cut to cut horizontal lines through the hair. You'll need several close together at the top near the hair line since this portion of the hair will need to be able to curve more tightly then the rest.

    Next do a one or two vertical cuts as well.

    Now select all of your hair pieces, right-click on them and choose Object Properties from the drop-down. In the window that comes up find the Display Properties (left-hand side of window) and make sure that Backface Cull is unchecked.

    Now is the hard part that will involve a lot of tweaking and adjusting on your end. There is no real step-by-step for this that I can give you, you'll just have to go with it and keep messing with it until it actually looks right.

    Select one of the pieces of hair and Hold down Shift and move it over by the head. This will duplicate the object, instead of actually moving the original.

    It's important that you leave your original un-altered base objects to the side so you can pick from them whenever you need to.

    On the new duplicated hair piece, move, rotate, and scale it into place near the head, and then start moving verts to get it into a shape and location you like.

    Now repeat this over and over with each of the pieces until it looks good. :P

    Cut in / connect to create new edges whenever you need to.

    Build up layers of hair to get more depth.


    Work your way around the whole head.

    You'll probably be constantly going back to fix and adjust the placement of various hair pieces until it looks right.

    And just keep working on it until it looks the way you want it to. It can take patience and lots of tweaking, or it may just work from the get-go. It will vary.

    It really helps to have a clear hair-style goal in mind, and a picture reference is always a big plus.

    That's it! I rigged him, but I'm not going to do a tutorial on rigging... At least not now. Hope that this tutorial helps someone. If there was some point in the tutorial where I said "now click on ..... and blah blah blah" but never explained where ..... was or how to find it and you got totally stuck, just send me a line (and mention where it was you got stuck) and I'll fill you in, and fix the tutorial :P

    I know there are typos and spelling errors and I don't care, so don't email me about them. I wrote this tutorial in Windows NOTEPAD... no spell check. And it's really long and it's too much of a pain in the ass to try and fix it now, so live with it.

    Tutorial Written by Athey Nansel-Moravetz, © 2007


  5. #5

    الصورة الرمزية arif2008
    مشرف قسم المبتدئين في الماكس

    الحالة
    غير متصل
    تاريخ التسجيل
    Mar 2008
    الدولة
    السودان
    المشاركات
    3,580
    Thanks
    0
    Thanked 8 Times in 7 Posts
    الصور
    9
    معدل تقييم المستوى
    113

    رد: درس اجنبي لنمذجة واكساء رجل

    مشكورة علي الدرس القيم أحسنت <<<
    ( حسبنا الله سيؤتينا الله من فضله إنا إلى الله راغبون ) دعاء الفرج بعد التشهد الأخير

  6. #6
    مصمم مشارك

    الحالة
    غير متصل
    تاريخ التسجيل
    Apr 2011
    الدولة
    Damascus
    المشاركات
    273
    Thanks
    0
    Thanked 1 Time in 1 Post
    معدل تقييم المستوى
    15

    رد: درس اجنبي لنمذجة شخص

    مشكوووووووووووووررررة على الدرس الرائع ...

    بس لو في منو على سينما فور دي لكنت قمت بالتطبيق فورا"

    تقبلي مرورررري ....

  7. #7


    الصورة الرمزية ام اياد
    الإشراف العام

    الحالة
    غير متصل
    تاريخ التسجيل
    Jul 2007
    الدولة
    مصرية في الامارات
    المشاركات
    7,307
    Thanks
    0
    Thanked 3 Times in 3 Posts
    معدل تقييم المستوى
    179

    رد: درس اجنبي لنمذجة واكساء رجل

    شكرا لمرورك اخي عمران ولو عايز درس سينما حاضرة اخي الكريم اعدكم بدرس سينما مميز ان شاء الله لكن اتمنى تعدوني بالتطبيق .

  8. #8


    الصورة الرمزية ام اياد
    الإشراف العام

    الحالة
    غير متصل
    تاريخ التسجيل
    Jul 2007
    الدولة
    مصرية في الامارات
    المشاركات
    7,307
    Thanks
    0
    Thanked 3 Times in 3 Posts
    معدل تقييم المستوى
    179

    رد: درس اجنبي لنمذجة واكساء رجل

    بارك الله فيك اخي عارف شكرا على مرورك اخي الكريم

  9. #9
    مصمم مشارك

    الحالة
    غير متصل
    تاريخ التسجيل
    Apr 2011
    الدولة
    Damascus
    المشاركات
    273
    Thanks
    0
    Thanked 1 Time in 1 Post
    معدل تقييم المستوى
    15

    رد: درس اجنبي لنمذجة واكساء رجل

    اعود و اكرر شكري لك على الدرس و اعدك ان سوف انفذ تطبيق الدرس

    بالسينما فوردي فور وضعه ....

    ^_^

  10. #10

    طالب بالمركز التعليمي

    الحالة
    غير متصل
    تاريخ التسجيل
    May 2009
    المشاركات
    171
    Thanks
    0
    Thanked 1 Time in 1 Post
    معدل تقييم المستوى
    0

    رد: درس اجنبي لنمذجة واكساء رجل

    درس جميل
    بارك الله فيكي اختي ام اياد

  11. #11
    الصورة الرمزية s.shark66
    مصمم جديد

    الحالة
    غير متصل
    تاريخ التسجيل
    Apr 2011
    المشاركات
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts
    معدل تقييم المستوى
    0

    رد: درس اجنبي لنمذجة واكساء رجل

    الف مليون شكر اختي الغالية

  12. #12

    مشرف أخبار الثري دي والتقنيات

    الحالة
    غير متصل
    تاريخ التسجيل
    May 2010
    الدولة
    مصر
    العمر
    28
    المشاركات
    3,460
    Thanks
    0
    Thanked 3 Times in 3 Posts
    الصور
    3
    معدل تقييم المستوى
    91

    رد: درس اجنبي لنمذجة واكساء رجل

    الدر بجد تحفة, مجهود رائع منكِ.


 

 

المواضيع المتشابهه

  1. درس عشب ( اجنبي )
    بواسطة عبدالله_90 في المنتدى الدروس التعليمية | Cinema4D Tutorials
    مشاركات: 5
    آخر مشاركة: 25 / 08 / 2011, 41 : 04 AM
  2. درس/مودلينغ واكساء
    بواسطة simmo7best في المنتدى ورش عمل ومسابقات
    مشاركات: 47
    آخر مشاركة: 03 / 09 / 2010, 31 : 09 AM
  3. درس لنمذجة رأس بطريقة احترافية
    بواسطة albesani في المنتدى Autodesk 3D Studio Max
    مشاركات: 2
    آخر مشاركة: 18 / 05 / 2009, 40 : 12 AM
  4. تصميم كرة قدم نمذجة واكساء.....
    بواسطة مؤيد سعد في المنتدى عرض ونقد الأعمال | Exhibition & Criticism Designs
    مشاركات: 3
    آخر مشاركة: 03 / 04 / 2008, 39 : 07 PM
  5. اول مشاركاتي تصميم كرة قدم نمذجة واكساء
    بواسطة مؤيد سعد في المنتدى عرض ونقد الأعمال | Exhibition & Criticism Designs
    مشاركات: 6
    آخر مشاركة: 17 / 10 / 2007, 14 : 04 AM

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
الساعة الآن 43 : 11 PM
Powered by vBulletin® Version 4.2.3
Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.
Search Engine Optimization by vBSEO