Follow us on Facebook Follow us on Twitter Linked In Flickr Watch us on YouTube My Space Blogger
التسجيل
النتائج 1 إلى 12 من 12

نمذجه مدفع الى (رشاش)1

هذا الموضوع : نمذجه مدفع الى (رشاش)1 داخل قسم للمبتدئين في الماكس | 3DsMax For Beginnersالتابع الي قسم Autodesk 3D Studio Max : This entry is part 1 of 2 in the series Modeling The AK-47 In this detailed, two part tutorial we ...

  1. #1

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    نمذجه مدفع الى (رشاش)1


    This entry is part 1 of 2 in the series Modeling The AK-47
    In this detailed, two part tutorial we are going to take a look at creating a high poly, realistic AK-47 in 3D Studio Max. We are going to use various polymodeling techniques and tools to create this very cool and detailed model.

    Additional Files/ Plugins:


    Step 1

    Start by creating a Cylinder (Create > Geometry > Cylinder) with 18 Sides and 1 Height Segment. Convert it to Editable Poly (Right Click > Convert To: > Convert To Editable Poly.) Select the back polygon and apply an Inset, Extrude and another Inset.

    Step 2

    Apply an Extrude once again and add two new edge loops as shown using Ring & Connect.

    Step 3

    On the bottom 5 polygons apply an Extrude and then click: Make Planar – Y.

    Step 4

    Add a new edge loop and Scale the polygon in the middle on the X-axis. Then apply an Extrude on the polygons on the two sides, and move the vertices back so the result looks like so.

    Step 5

    Apply an Extrude two more time on the polygons we just extruded. The second Extrude needs to be done with larger Height Amount. Then Move the vertices to the back using the Move tool, so it looks like so.

    Step 6

    Add some more loops and Delete the selected polygons.

    Step 7

    After that, use Shift+Drag to Extrude the selected edges forward.

    Step 8

    Weld the corner verticies to the side using the Weld button, then switch to Border mode and select the open hole, fill the hole by hitting the Cap button. Finally connect the four vertices in the middle using Connect.

    Step 9

    On the top polygons apply an Extrude and then click Make Planar – Y. After that move the vertices backwards to get this shape.

    Step 10

    Add one more vertical loop and then two horizontal loops. Select the polygons on the sides as shown and click Bridge to create a hole.

    Step 11

    Using Ring & Connect, add loops as shown.

    Step 12

    Add more loops like so.

    Step 13

    Add a few more edge loops close to the edges as shown.

    Step 14

    Now add more edge loops around the bottom part as shown.

    Step 15

    On the front polygon apply an Extrude two times. The first extrude needs to be with a low Height value in order to create a loop close to the edge. Finally Delete the selected edges.

    Step 16

    On the end polygon, apply a Bevel with a zero Height and a positive amount. After that apply an Extrude, Bevel and another Extrude.

    Step 17

    On the top five polygons, apply an Extrude and then add a loop close to each edge, as shown.

    Step 18

    Add a new edge loop close to the edge, and then remove the selected edge using Ctrl+Remove.

    Step 19

    Connect the selected vertices using Connect, and also add two horizontal loops.

    Step 20

    On the front polygon apply an Inset and Extrude, and again Inset and Extrude. But this time the Extrude needs to be with a negative Height amount. After that Delete the polygon.

    Step 21

    Add new edge loops close to the edges as shown.

    Step 22

    Create a new Cylinder with 18 Sides, convert it to Editable poly and add loops in the same places, as they are on the element below the cylinder. Also apply an Inset on the front and back polygons.

    Step 23

    Connect the two objects together using Attach, and then apply a Bridge on the selected front and back polygons.

    Step 24

    Delete the polygons on the bottom of cylinder (that face the other element,) then click Make Planar – Y. After that move the shape to the bottom in order to get something like this. Also Delete the top polygons from the bottom element as well.

    Step 25

    Scale the top element hole on the X-axis until it’s the same size as the bottom one. Add two loops close to the edges and four edges as shown. Two on the front side and two on the back side.

    Step 26

    On the selected edges, press Ctrl+Remove.

    Step 27

    On the holes of the two elements, apply a Bridge and on the inside part of the cylinder. Add an edge loop around the inside close to the outer edges.

    Step 28

    Select the bottom loop and go to the Edit Geometry > Constraints, and check Edge. Then move the edge loop upwards on the Z -axis.

    Step 29

    Delete the top seven sides of the cylinder and from the constraints menu, check None. Then select the two holes using Border and click Make Planar – Y.

    Step 30

    Apply a Cap to both holes. On the inside of the cylinder we need to add loops in the same places as they are on the outside, and then connect them using Connect. Finally add an edge loop on the two sides close to the top edge.

    Step 31

    Create a new Cylinder with 10 Sides, Scale it on the Z-axis and place it under the barrel. After that select the front polygon and apply an Inset and Extrude.

    Step 32

    Apply an Inset two more times. The first Inset needs to be done with low amount in order to create a loop close to the edge. After that add loops close to each outer edge.

    Step 33

    Create a new Box and Convert it to Editable poly, add 6 vertical loops and one horizontal.

    Step 34

    Move the vertices around until you get this shape.

    Step 35

    Apply a Chamfer with 4 Segments on the two bottom edges.

    Step 36

    Scale the top two polygons on the Y-axis (Scale the front one more than the back one.) Finally select the side polygons as shown and Delete them.

    Step 37

    Now Delete the polygons as shown, and add additional edge loops as shown below.

    Step 38

    On the back side, Connect the three pairs of two vertices and between them we add two edges.

    Step 39

    Now we Connect the vertices to the top ones using Connect.

    Step 40

    Add additional edges as shown.

    Step 41

    Now connect the edges with the vertices on the bottom.

    Step 42

    Apply a Turbosmooth modifier with 2 Iterations. Now using the same techniques, create the top element shown below.

    Step 43

    Create a new Box a bit bigger than the front side of the top element with corresponding loops. Add two more loops as shown.


  2. #2

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    رد: نمذجه مدفع الى (رشاش)1


    Step 44

    On the front polygon of the box, apply an Inset and by using Weld. We bridge the selected six vertices.

    Step 45

    Select the edges as shown and press Ctrl+Remove.

    Step 46

    Delete the front polygon of the box, and create a new Cylinder with 21 Sides. After that add a loop at the back end of the cylinder, and select every two polygons on the sides, skipping two polygons between andthree polygons at the bottom .

    Step 47

    Apply a Bevel and then Delete the selected polygons.

    Step 48

    On the hole we click Make Planar – Z, and then add edge loops as shown.

    Step 49

    Using Attach we combine the two elements together, and Delete the back polygon of the Cylinder. Finally add two more loops as shown.

    Step 50

    We connect the geometry of the two elements using Bridge. On the front hole of the cylinder we use Shift+Scale to decrease the size of the hole a bit, then we Shift+Drag twice. The first time just a tiny bit to create a loop close to the edge, and the second time we drag a lot more inwards. Finally add a loop at the back side of the element.

    Step 51

    Apply Turbosmooth – Iterations: 2. On the bottom element we use the same techniques to connect it to the main element. Again add a Turbosmooth with 2 Iterations.

    Step 52

    Using the techniques from steps 46-49, we create a new element which is a bit longer. And on the front polygon we apply an Inset.

    Step 53

    Apply an Extrude and move the vertices forward, then connect the verticies using Connect.

    Step 54

    Now apply an Extrude seven times. The first and last one need to be done with low Height, in order to get a loop close to the outer edge.

    Step 55

    Create a new Cylinder with 18 Sides and add six loops. The first and the last loops need to be close to the outer edges. After that combine the elements using Attach.

    Step 56

    Select the three rows of polygons on the top of the cylinder we just created. As well as the same number of polygons on the top element, and connect them using Bridge.

    Step 57

    Select the front and back polygons of the cylinder and apply an Inset and then a Bridge.

    Step 58

    Apply a Chamfer on the inner loops, and add two more loops close to the top and bottom cylinders across the bridged section.

    Step 59

    Select the bottom five polygons and apply an Extrude three times. The first and the last one need to be done with low Height in order to get a loop close to the outer edge.

    Step 60

    Apply a Turbosmooth modifier with 2 Iterations.

    Step 61

    On the back side we create a similar element to the one on the front side and apply Turbosmooth – Iterations: 2.

    Step 62

    On the bottom part, create a similar element like we did for the front side and then apply Turbosmooth – Iterations: 2.

    Step 63

    Next, create a Box and add edge loops as shown.

    Step 64

    On the back two edges we apply a Chamfer, and then we Target Weld the vertices which form the triangle and are super close to each other (zoom in to the selected vertex to make welding them easier.)

  3. #3

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    رد: نمذجه مدفع الى (رشاش)1


    Step 65

    On the front two polygons apply an Extrude three times and Scale them on the Y-Axis after each extrude, in order to get a rounded shape.

    Step 66

    Add loops as shown.

    Step 67

    We then connect the two unfinished loops to the front vertex using Connect. And after that we add more loops close to the edges, as shown.

    Step 68

    Add more loops as shown and then apply Turbosmooth – Iterations: 2.

    Step 69

    Create a Cylinder and Convert it into Editable Poly. On the end polygons, apply a Bevel twice in order to get a rounded shape on each end. Finally add loops close to the edges.

    Step 70

    Create a Box, Convert it into Editable Poly. Add seven vertical loops and move the vertices until you get a similar shape to what’s shown below. After that make a copy of the element and move it to the other side.

    Step 71

    On the back two polygons we apply Bridge to connect them, and then add loops as shown.

  4. #4

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    رد: نمذجه مدفع الى (رشاش)1

    Step 72

    Next, create a Tube and place it as shown. Convert it into editable poly and then apply a Chamfer on thefour corner loops as shown. Finally apply a Turbosmooth – Iterations: 1.

    Step 73

    Create another Box with a width that will fit between the objects, and add loops as shown.

    Step 74

    Hit S on the keyboard to open the Snap Toggle options and click the Vertex option On. After that Delete the selected polygons.

    Step 75

    Click Alt+Q to go into Isolation Mode in order to see only the selected element. Use Shift + Drag and Move the selected edge forward on the Y-Axis until it reaches the vertex with the green plus sign. This way everything will fit perfectly.

    Step 76

    Quit from the Snap Toggle menu and apply a Bridge on the selected edges.

    Step 77

    On the two holes we apply a Cap and then connect the selected vertices using Connect.

    Step 78

    Add two loops and connect the end vertices with Connect.

    Step 79

    Finally add loops close to each edge and apply Turbosmooth – Iterations: 2. Then Exit Isolation Mode.

    Step 80

    Create a Box and Rotate it 25 degrees. After that on the back polygon, apply a Bevel and then using Connect add two loops close to each edge.

    Step 81

    Apply Turbosmooth – Iterations: 2.

    Step 82

    Create a Cylinder with 18 sides and convert it into Editable Poly. After that on the front polygon apply an Inset three times and a Bevel three times, until you get rounded surface.

    Step 83

    On the polygons we got from the second Inset, we apply an Extrude with a Negative Height.

    Step 84

    Apply a Chamfer on all then loops.

    Step 85

    On the cylinders back polygon, we apply an Inset in order to avoid mesh issues once we apply the Turbosmooth.

  5. #5

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    رد: نمذجه مدفع الى (رشاش)1

    Step 86

    Make a copy of the element and Rotate it 180 degrees, after that combine the elements together using Attach and then apply a Turbosmooth – Iterations: 2.

    Step 87

    Create a Cylinder with 18 sides and Convert it into Editable Poly. After that Delete the front and back polygons as well as the nine bottom polygons.

    Step 88

    Using Shift + Drag, drag the selected edges down (on the Z-Axis) as shown.

    Step 89

    Select the vertices on the sides and Scale them on the Y-Axis until the element has this shape. On the bottom, connect the vertices using Target Weld.

    Step 90

    Apply a Cap on the two sides of the element and Connect the vertices in the three places as shown. And then Apply an Extrude on the bottom two polygons.

    Step 91

    Now Apply an Extrude on the six side polygons, as shown.

    Step 92

    Apply an Extrude on the front three polygons as well, and add loops close to each edge.

    Step 93

    Apply an Inset on the selected polygons.

    Step 94

    Finally, Apply a Turbosmooth – Iterations: 2 and place the element.

    Step 95

    Create a Box, convert it into Editable Poly and add eight loops as shown. And then select the back twovertices and move them downwards on the Z-Axis.

    Step 96

    Apply an Extrude on the front three polygons and Scale the selected vertices a bit on the X-Axis, as shown.

    Step 97

    Add two horizontal loops and apply a Bevel on the selected polygons.

    Step 98

    Add eight more loops (four on the top, and four on the bottom part of the element.)

    Step 99

    Add more loops as shown.

    Step 100

    Next, apply an Extrude on the selected polygons.

  6. #6

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    رد: نمذجه مدفع الى (رشاش)1

    Step 101

    Move the top polygon down. And then Select and Move the bottom polygon backwards and downwards until you get something like this.

    Step 102

    Apply an Extrude on the top polygon and add three loops as shown.

    Step 103

    Select the vertices on the middle loop we just created and Move them backwards in order to get a rounded shape once we apply the Turbosmooth. After that add loops as shown.

    Step 104

    Add two more loops as shown.

    Step 105

    Delete the polygons on the front, and add loops close to the edges.

    Step 106

    Add six more loops as shown.

    Step 107

    On the selected polygons (on the bottom) apply an Extrude two times. The first extrude needs to be with lowHeight in order to get an edge close to the main one. Finally Delete the polygons (this will be the trigger hole.)

    Step 108

    On the bottom of the main body we need to move the vertices until we get shape like this, and then select the polygons.

    Step 109

    Again apply an Extrude twice the same way we did before and Delete the polygons. And then add loops close to each edge.

    Step 110

    We also need to add these loops as shown.

    Step 111

    Using Connect we need to connect the selected vertices.

    Step 112

    On the vertices in the middle we apply a Chamfer and because the shape we get is not a perfect circle, we select the loop and go to Loop tools and select Circle.

    Step 113

    After that apply Bridge on the polygons and then apply a Chamfer on the loops. Finally apply a Turbosmooth – Iterations: 2.

    Step 114

    Create a new Box and Convert it into Editable Poly. Add a loop in the middle and shape it like so.

    Step 115

    Add more loops and create this shape.

    Step 116

    Next, apply a Chamfer on the selected edges.

    Step 117

    And Scale the front two loops of vertices on the X-Axis.

    Step 118

    Scale the middle top and bottom polygons on the X-Axis as well.

    Step 119

    Switch to Isolation Mode and apply a Bevel on the polygons.

    Step 120

    Delete the front three polygons and move the selected edges forward.

    Step 121

    Add loops as shown.

    Step 122

    On the back side of the element, Connect the vertices. And then using Shift + Drag and Move, move them back a little on the Y-Axis to copy them as a separate element.

    Step 123

    On the polygons we apply an Extrude and then an Inset.

    Step 124

    Add more loops as shown.

    Step 125

    Add three more loops. One vertical and two horizontal.

    Step 126

    Connect the vertices in the middle with the vertices around the outside as before.

    Step 127

    As we did previously, apply a Chamfer on the vertices in the middle and then select the four loops and go to the Loops menu > Loop Tools, and click Circle. After that, select the four polygons that were created and apply a Bridge. Finally apply a Chamfer on the loops.

    Step 128

    Apply a Turbosmooth – Iterations: 2 and then create two new Spheres and put them into the holes. Also Scale them on the Y-Axis on order to make them not so rounded.

  7. #7

    الصورة الرمزية ::حامل المسك::
    مشرف قسم عرض ونقد

    الحالة
    غير متصل
    تاريخ التسجيل
    Jun 2012
    الدولة
    مصر
    المشاركات
    1,644
    Thanks
    6
    Thanked 6 Times in 6 Posts
    الصور
    1
    معدل تقييم المستوى
    74

    رد: نمذجه مدفع الى (رشاش)1

    جزاك الله خيرا
    ::: لا عزة إلا بالكتاب و السنة :::
    :: للتأكد من صحة الحديث ::

    :: حكم الكلام بين الرجال و النساء ::
    .. لا أتكلم مع النساء ..

    :: والله ماغشيت إمرآة في اليقظة او المنام إلا أم عبدالله زوجتي
    وأني لأرى المرآة في المنام مما لاتحل لي فأصرف بصري عنها ::ابن سيرين ::
    :: إن الحق لا يعرف بالرجال، اعرف الحق تعرف أهله ::علي ابن ابي طالب
    ::

    :: موقعي الشخصي ::



  8. #8

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    رد: نمذجه مدفع الى (رشاش)1

    وانت ايضا اخى الكريم

  9. #9

    الصورة الرمزية arif2008
    مشرف قسم المبتدئين في الماكس

    الحالة
    غير متصل
    تاريخ التسجيل
    Mar 2008
    الدولة
    السودان
    المشاركات
    3,580
    Thanks
    0
    Thanked 8 Times in 7 Posts
    الصور
    9
    معدل تقييم المستوى
    113

    رد: نمذجه مدفع الى (رشاش)1

    مشكور أخي وليد <<<<<
    ( حسبنا الله سيؤتينا الله من فضله إنا إلى الله راغبون ) دعاء الفرج بعد التشهد الأخير

  10. #10

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    رد: نمذجه مدفع الى (رشاش)1

    الشكر لله اخى عارف

  11. #11
    الصورة الرمزية lolilous
    مصمم جديد

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2013
    المشاركات
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    معدل تقييم المستوى
    0

    رد: نمذجه مدفع الى (رشاش)1

    جميل جداً أستاذ وليد .. مجهود و نتيجة ممتازة
    كم من الوقت أخذ هذا التصميم منك ؟
    و هل يتطلب ذلك معرفة مقاسات معينة ؟
    أعذرنى فأنا على أول الطريق لتعلم الماكس ..

  12. #12

    الصورة الرمزية waleed_ali
    مشرف القسم العام والإسلامي

    الحالة
    غير متصل
    تاريخ التسجيل
    Jan 2010
    الدولة
    A, A
    المشاركات
    20,140
    Thanks
    587
    Thanked 288 Times in 256 Posts
    الصور
    21
    معدل تقييم المستوى
    433

    رد: نمذجه مدفع الى (رشاش)1

    عزيزى الفاضل هذا درس اجنبى وليس تصميم والموضوع كله ليس به مقاسات بس لو هتشتغل فى الموديل ظبط مقاسات اليونيت ستب تبقى بالسنتيمتر وربنا يوفقك


 

 

المواضيع المتشابهه

  1. درس نمذجه سلاح الى (رشاش )
    بواسطة waleed_ali في المنتدى قسم للمبتدئين في الماكس | 3DsMax For Beginners
    مشاركات: 4
    آخر مشاركة: 29 / 12 / 2012, 54 : 07 AM
  2. مدفع
    بواسطة MOHAMMAD FOR GRAPHIC في المنتدى السينما فوردي | Cinema4D
    مشاركات: 3
    آخر مشاركة: 23 / 09 / 2012, 07 : 08 AM
  3. مدفع الإفطار ! ! !
    بواسطة امة الله في المنتدى المنتدى العام
    مشاركات: 1
    آخر مشاركة: 10 / 08 / 2010, 35 : 08 AM
  4. سيدى احترافي لصنع مدفع رشاش بالفوتوشوب
    بواسطة Archi_Hisham في المنتدى الدورات والدروس التعليمية | Photoshop Tutorials & Tips
    مشاركات: 10
    آخر مشاركة: 04 / 06 / 2008, 33 : 01 AM
  5. مدفع الافطار
    بواسطة ABU-YuSuF في المنتدى عرض ونقد الأعمال | Exhibition & Criticism Designs
    مشاركات: 3
    آخر مشاركة: 17 / 01 / 2008, 15 : 12 PM

الكلمات الدلالية لهذا الموضوع

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
الساعة الآن 10 : 09 AM
Powered by vBulletin® Version 4.2.3
Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.
Search Engine Optimization by vBSEO